FUSION SPLICER

광융착접속기

Part No: FS-17S

    • Small and Light
    • Water-resistant, dust-resistant and shock-resistant in design


Features

  • Graphical interfaces and touch screen
  • 300 groups of fusion splicing modes, 100 groups of heating modes
  • 10000 groups of fusion records, 64 images storage
  • Ceramic presser foot, ceramic V-block, all-in-one fixture
  • Dual-direction splicing, automatic splicing, intelligent pyrocondensation
  • USB and SD card interfaces, U-disk automatic software upgrade
  • Builtin modular lithium battery, supports 220 times of splicing and heating cycles

Specification

Model FS-17S
Alignment method Precise core alignment and cladding alignment
Applicable fibers Any common optical fibers, rubber-insulated fibers and jumpers that meets
requirements of ITU-TG. 651 -653, ITU-TG. 655 and ITU-TG. 657.
Optical fiber diameter Cladding : 80-150um. Coating layer : 0.1-3mm
Cutting length 5-16mm (coated optical fiber diameter ≤250um) : 10mm (coated optical fiber diameter : 0.25-3mm)
Fusion splicing 0.02dB(SMF) : 0.01dB(MMF): 0.04dB(DSF)
consumption(typical value)
Return loss (NZDSF) Better than 60dB
Fusion splicing time(typical value) 7s
Heating time (typical value)t 18s
Pulling force test 1.96-2.25N
Thermal shrinkage tube 60mm : 40mm and a series of thermal shrinkage tubes
Graphical display High-performance 4.3inch LCD
External power AC: AC 100-240V, 60Hz. 0-1.5A: DC: DC 10-15V
Dimensions Weight 120mm(W) x 130mm(H)x 154mm(D) (without rubber anti-vibration pad)
1.59KG(host engine) 0.37KG(battery)